Multiple feet results
Foot corrections
Foot corrections in a multiple feet machine are viewed from the result screen.
If results are displayed in 3D, tap the machine (1) to access the results multiple feet screen. In
2D, tap the machine centerline (1) to open the multiple feet screen.
Note
If the machine intermediate feet were already defined within machine properties, then
the foot corrections for the intermediate feet will be displayed. In this example, the inter-
mediate feet have not been defined.
Tap to add any intermediate feet.
76 Version:
1.0
On-board help
Shop for Fluke products online at:
1.888.610.7664
www.MyFlukeStore.com
To Next Page
Loading...
