Thermal growth values are activated by swiping the icon to the right [1]. When thermal
growth values are enabled, the corresponding machine within the mini train inset at the top-
right corner is shown in orange [2]. After thermal growth values have been entered, tap
to proceed.
Thermal growth calculator
The calculator is used to calculate thermal growth compensation if no other values are avail-
able. Thermal growth is calculated from the material coefficient of linear thermal expansion,
expected temperature difference and length of the shaft centerline from the shim plane.
When in the thermal growth screen, tap value box of feet pair [1] where thermal growth is to
be entered.
The box is highlighted blue [2], and the 'Calculator' tab [3] comes into view.
Tap 'Calculator' tab [3] to access the thermal growth calculator screen.
Fluke
831 37
On-board help
Shop for Fluke products online at:
1.888.610.7664
www.MyFlukeStore.com
To Next Page
Loading...
