Results
l
(1) Displays both horizontal and vertical foot and coupling results
l
(2) Used to display only vertical foot and coupling results
l
(3) Used to display only horizontal foot and coupling results
l
(4) Used to display foot and coupling results in 2-D
l
(5) Used to display foot and coupling results in 3-D
l
(6) Starts Live Move
l
(7) Used to display all measurements taken on the coupling
l
(8) Used to generate asset measurement report
l
(9) Used to save asset measurements in asset park
l
(10) Used to select results mode
l
(11) Tap the slider on the mini train icon to open the triple "Train Manager" / "Train
Setup" / "Train Fixation" screen (Note: The machine train manager screen is not active.)
l
(12) Alignment condition tolerance symbol
In the results screen, the three icons – dimensions, measurement and results
– are active and may be used anytime.
The 2-D V and H foot and coupling results screens show the vertical (V) and horizontal (H) foot
positions respectively.
The colors of the bold arrows next to the feet correction values are directly related to the coup-
ling alignment condition as follows:
Blue – excellent (feet should not be moved)
Green – acceptable (if possible feet should remain unaltered)
Red – poor (move feet to attain a better alignment condition)
72 Version:1.0
On-board help
Shop for Fluke products online at:
1.888.610.7664
www.MyFlukeStore.com
To Next Page
Loading...
