To Next PageTo Next Page
Need help?Do you have a question about the Fluke 376 FC and is the answer not in the manual?
General| Product type | Digital multimeter |
|---|---|
| Product color | Grey, Red, Yellow |
| Frequency range | 5 - 500 kHz |
| AC current range | 0 - 2500 A |
| AC voltage range | 0 - 1000 V |
| DC current range | 0 - 600 A |
| Resistance range | 1 - 60000 Ω |
| Capacitance range | 0 - 1000 nF |
| Resistance resolution | 0.1 Ω |
| Resolution (frequency) | 0.1 Hz |
| Resolution (AC current) | 0.1 µA |
| Resolution (AC voltage) | 100 mV |
| Basic accuracy (frequency) | 0.5% ±5 digits |
| Basic accuracy (DC current) | 2% ±5 digits |
| Basic accuracy (DC voltage) | 1% ±5 digits |
| Basic accuracy (capacitance) | 1% ±4 digits |
| Battery type | AA |
| Power source | Battery |
| Number of batteries supported | 2 |
| Operating altitude | 0 - 2000 m |
| Maximum storage altitude | 12000 m |
| Storage temperature (T-T) | -40 - 60 °C |
| Operating temperature (T-T) | -10 - 50 °C |
| Operating relative humidity (H-H) | 0 - 90 % |
| Test leads | Yes |
| Test lead length | 1.8 m |
Weight and Dimensions| Depth | 45 mm |
|---|---|
| Width | 85 mm |
| Height | 249 mm |
| Weight | 395 g |
Explains the meaning of 'Warning' and 'Caution' symbols and their implications.
Lists essential safety instructions to prevent electrical shock, fire, or personal injury.
Instructions for inspecting the product and test leads before use to ensure safety.
Advisories on safe voltage limits and avoiding specific measurement scenarios.
Guidelines for safe handling of probes, battery replacement, and CAT ratings.
Procedures for product repair, cleaning, and avoiding damage from improper use.
Visual identification of the clamp meter's main parts and controls.
Explains the operation of automatic power off and the backlight feature.
How to use the display hold, minimum, maximum, and average functions.
Instructions for using the LOG function and clearing recorded data.
How to measure AC current using the clamp jaw and the flexible probe.
Specifications for AC voltage, DC voltage, and mV DC measurements.
Specifications for AC voltage, DC voltage, and mV DC measurements.
Specifications for frequency measurements via jaw and flexible probe.
