To Next PageTo Next Page
Need help?Do you have a question about the Fluke 374 FC and is the answer not in the manual?
General| Test leads | Yes |
|---|---|
| Product color | Black, Red, Yellow |
| AC voltage | 1000 V |
| Resistance (max) | 6000 Ω |
| Resistance (min) | 0.1 Ω |
| Measuring category | CAT III 1000V, CAT IV 600V |
| AC voltage resolution (min) | 0.1 V |
| AC current maximum resolution (probe) | 0.1 A |
| Battery type | AA |
| Battery technology | Alkaline |
| Number of batteries supported | 2 |
| Operating altitude | 0 - 3000 m |
| Non-operating altitude | 0 - 12000 m |
| Storage temperature (T-T) | -40 - 60 °C |
| Operating temperature (T-T) | -10 - 50 °C |
| Operating relative humidity (H-H) | 0 - 90 % |
Weight and Dimensions| Depth | 45 mm |
|---|---|
| Width | 85 mm |
| Height | 249 mm |
| Weight | 395 g |
Key safety instructions for preventing electrical shock, fire, or injury.
Guidelines for safe operation, including PPE, checks, voltage limits, and circuit de-energization.
Best practices for safe operation, including probe handling, battery replacement, and capacitor discharge.
Procedures for safe maintenance, repair, and avoiding product damage.
Demonstrates AC current measurement using the clamp jaw and frequency measurement.
Instructions for safely replacing the device batteries.
Steps to connect the clamp meter to FC Tools via Bluetooth.
