To Next PageTo Next Page
Need help?Do you have a question about the Fluke 902 FC and is the answer not in the manual?
General| Category | Clamp Meter |
|---|---|
| Connectivity | Bluetooth |
| Jaw Opening | 30 mm |
| Wireless Connectivity | Yes |
| Battery Type | 2 x AA |
| Safety Rating | CAT III 600 V |
| AC Voltage | 600 V |
| DC Voltage | 600 V |
| Capacitance | 1000 µF |
| Temperature | -10 °C to 400 °C (14 °F to 752 °F) |
| AC Current Accuracy | ±(1.5% + 3 digits) |
| AC Voltage Accuracy | ±1% + 3 digits |
| Resistance Accuracy | ±(1.0% + 2 digits) |
| Operating Temperature | -10 °C to 50 °C (14 °F to 122 °F) |
| Weight | 340 g (12 oz) |
| Display | Backlit LCD |
How to measure AC and DC voltage using the clamp meter.
Procedure for measuring resistance and continuity.
Steps for measuring microamps, often for flame rod testing.
Instructions for measuring temperature using the probe.
Procedure for measuring capacitance.
How to measure AC current using the clamp jaws.
How to control the backlight and disable timeout.
Using the minimum and maximum value recording mode.
How to use the display hold function.
How to disable the automatic power off feature.
Instructions for cleaning the clamp meter and accessories.
Steps for replacing the device batteries.
Detailed electrical performance specifications of the meter.
General operating and physical specifications for the meter.
