Need help?Do you have a question about the Fluke 902 and is the answer not in the manual?
General| Type | Clamp Meter |
|---|---|
| AC Voltage Range | 600 V |
| DC Voltage Range | 600 V |
| Display | Digital |
| Resolution | 0.1 A |
| Battery Life | 200 hours |
| Operating Temperature | -10 °C to 50 °C |
| Storage Temperature | -40 °C to 60 °C |
Instructions for measuring AC or DC voltage using the meter.
Steps to measure resistance and continuity with the meter.
Procedure for testing heating system flame rods using microamp measurement.
How to measure temperature in Celsius or Fahrenheit using the meter.
How to measure capacitance, including discharge and polarity considerations.
Procedure for measuring AC current, including proper jaw placement and wire cancellation.
How to control the meter's backlight and disable the auto-off feature.
Steps to use the minimum and maximum recording mode for measurements.
How to activate and exit the display hold function for capturing readings.
Information on the automatic power-off feature and how to disable it.
Instructions for safely cleaning the meter case and avoiding damaging solvents.
Step-by-step guide for replacing the meter's batteries safely.
Detailed electrical ranges, resolutions, and accuracy for meter functions.
Environmental and operational specifications like temperature, humidity, and altitude.
Details on size, weight, standards, approvals, over-voltage, and power requirements.
To Next Page
