®
PN 2649733 July 2006
© 2006 Fluke Corporation. All rights reserved. Printed in U.S.A.
All product names are trademarks of their respective companies.
1
902
HVAC Clamp Meter
Calibration Information
Introduction
XWWarning
To avoid electric shock or injury, do not perform the performance tests or
calibration procedures unless you are qualified to do so.
The information provided in this manual is for the use of qualified personnel
only.
The 902 Calibration Information provides the information necessary to verify the performance and adjust
the calibration of the Fluke 902 HVAC Clamp Meter, hereafter known as the Meter.
The following information is included in this document:
• Safety Information and International Electrical Symbols
• Specifications
• Maintenance
• Performance Tests
• User-Replaceable Parts and Accessories
• Warranty Statement
See the 902 Users Manual for complete operating instructions.
Contact Information
To contact Fluke, call:
1-888-99-FLUKE (1-888-993-5853) in USA
1-800-36-FLUKE (1-800-363-5853) in Canada
+31 402-675-200 in Europe
+81-3-3434-0181 Japan
+65-738-5655 Singapore
+1-425-446-5500 in other countries
For additional information about Fluke, its products, and services, visit Fluke’s web site at:
www.fluke.com
To register this product, go to register.fluke.com
To Next Page
Need help?
General
