Fluke 902 - Using the Meter; AC and DC Voltage Measurement

902
Users Manual
10
Using the Meter
AC and DC Voltage Measurement
To measure AC or DC voltage:
1. Insert the test leads into the Meter.
2. Turn the rotary switch to V.
3. Press A to choose AC or DC voltage. The display
reflects the chosen voltage mode.
4. Use the test leads to take the measurement. The Meter
reading appears on the display.
Note
When a measured voltage is above 30 V,
Zappears on the display. When the voltage drops
below 30 V, Zdisappears.