To Next PageTo Next Page
Need help?Do you have a question about the Fluke 378 FC and is the answer not in the manual?
General| Category | Measuring Instruments |
|---|---|
| Type | Clamp Meter |
| Voltage Measurement | 1000 V AC/DC |
| Jaw Capacity | 34 mm |
| Continuity | ≤ 30 Ω |
| Safety Rating | CAT IV 600 V, CAT III 1000 V |
| True RMS | Yes |
| iFlex Compatibility | Yes |
| Warranty | 3 years |
| Frequency Measurement Range | 5.0 Hz to 500.0 Hz |
| Connectivity | Bluetooth |
| Battery Type | 2 x AA |
| Current Measurement | 1000 A AC/DC |
Measures AC voltage using capacitive sensing technology without direct contact.
Convention for three-phase AC systems; measures sequential line-to-ground voltage.
System wirelessly connecting clamp to smartphone/tablet for data management.
Explains the main control knob functions and display elements for operation.
Details functions like Hold, Min/Max/Avg, and Inrush for measurements.
Non-contact AC voltage, current, and frequency measurement procedure.
Procedure for measuring AC or DC voltage using test leads.
Steps for connecting and using the flexible current probe.
Captures surge current spikes when devices are powered on.
