Need help?Do you have a question about the Fluke a3001 FC and is the answer not in the manual?
General| AC current range | 0.5 - 2500 A |
|---|---|
| Measuring category | CAT III 300V |
| Operating altitude | 0 - 2000 m |
| Maximum storage altitude | 12000 m |
| Storage temperature (T-T) | -40 - 60 °C |
| Operating temperature (T-T) | -10 - 50 °C |
| Operating relative humidity (H-H) | 5 - 90 % |
Weight and Dimensions| Depth | 14 mm |
|---|---|
| Width | 63.5 mm |
| Height | 165 mm |
| Weight | 220 g |
Provides contact information and support channels for Fluke Corporation.
Verifies display functionality by checking all segments during a specific power-on sequence.
Checks if the product's backlight illuminates correctly when the power button is pressed.
Verifies keypad functionality by testing each button for correct response and backlight activation.
Details the procedure and equipment needed to test the product's AC current measurement accuracy.
Enables access to product settings like auto power off, backlight, and calibration.
Explains how to enter the password to access the product's calibration mode.
Provides steps to modify the existing password for accessing calibration features.
Guides users on how to reset the calibration password to its default value (1234).
Instructions for cleaning the product using a soft cloth and mild cleaning solution.
Details the process for safely replacing the product's AA batteries.
Lists parts that can be replaced by the user, including part numbers and quantities.
To Next Page
