Fluke 902 FC - Backlight; MIN MAX Recording Mode

902 FC
Users Manual
20
Backlight
Push  to toggle the backlight on and off. The backlight
automatically turns off after 2 minutes.
To disable the automatic backlight timeout:
1. Hold  and tur
n on the Prod
uct.
2. Push
.
MIN MAX Recording Mode
The MIN MAX recording mode captures the minimum and
maximum input values. When a new high or low is detected, the
Product beeps.
To use this feature:
1.
Turn the rotary switch to the desired measurement
function.
2. Push
 to ente
r MIN MAX Mode
.
 and the hig
hest reading detec
ted since entering MIN
MAX mode sho
w on the display.
3. Push  to step
through the minimum (MIN) and
present
readings.
4.
To pause MIN MAX recording without erasing stor
ed values,
push . s
hows on the display.
5.
To resume MIN MAX recording, push  again.
6.
To exit MIN MAX mode and erase stored readings, push 
for at least 2 seconds.