Fluke 902 FC - Measure Temperature

902 FC
Users Manual
16
Measure Temperature
The Product measures temperature in either Celsius (°C) or
Fahrenheit (°F).
XW Warning
To prevent possible electrical shock, fire, or
personal injury, do not touch voltages >30 V ac rms,
42 V ac peak, or 60 V dc.
To measure temperature (see Figure 3):
1.
Connect the Probe to the input jacks noting correct polarity
of
the probe.
2.
Turn the rotary switch to
.
3. Push
 to select °C or °F.
The chosen tem
perature mode shows on the display.
4.
Position the Probe to take the me
asurement.
5.
Read the measured temperature on the display.
Note
To meet stated accuracy, the Product and plug of the
Probe must be at the same temperature.