HVAC True-rms Clamp Meter
Use the Product
13
The chosen voltage mode shows on the display.
4.
Measure the voltage by touching the probes to the
correct test
points of the circuit.
5.
Read the measured voltage on the display.
Note
When a measured voltage is above 30 V,
shows on
the display. When the voltage drops below 30 V,
disappears.
Measure Resistance and Continuity
XW Warning
To avoid false readings that can lead to electrical
shock and injury, de-energize the circuit before
taking the measurement.
To measure resistance or continuity:
1.
Insert the test leads into the Produ
ct.
2.
Turn the rotary switch to
.
To Next Page
Loading...
