Fluke 9040 Supplement

9040 Users Manual Supplement
11/21 1
Change #1, 65800
On page 5, add the following to the Symbols table:
à Conforms to relevant South Korean EMC Standards.
Change #2, 448, 506
On page 3, add the following Warnings:
• Read all safety information before you use the Product.
• Use this Product indoors only.
• Use only current probes, test leads, and adapters supplied
with the Product.
• Do not use the Product above its rated frequency.
• Do not apply more than the rated voltage, between the
terminals or between each terminal and earth ground.

Fluke 9040 Specifications

Operating Environment

operating temperature range	0 °C to +40 °C
pollution degree	2
type of protection	IP 40

Power

fuse rating	500 mA / 1000 V
power supply	From unit under test
maximum operating voltage	690 V

Safety

electrical safety standard	IEC 61010-1/EN 61010
protection levels	CAT III/600 V to ground, CAT IV/300 V to ground
nominal voltage for rotary field direction	40 to 690 V ac

Weight and Dimensions

size	124 x 61 x 27 mm
weight	200 g
fuse size	6.3 x 32 mm