Need help?Do you have a question about the Fluke 9190A and is the answer not in the manual?
General| Category | Measuring Instruments |
|---|---|
| Model | 9190A |
| Manufacturer | Fluke |
| Display | LCD |
| Display Resolution | 0.01 °C |
| Controller | Microprocessor-based |
| Communication | RS-232 |
| Frequency Range | 50/60 Hz |
| Storage Temperature | -20 °C to 60 °C |
| Accuracy | ±0.05°C |
| Power Supply | 100-240V AC, 50/60Hz |
| Heating Time | 15 min to temperature |
| Operating Temperature | 40 °C |
Overview of the calibrator's function, features, and front panel components.
Steps for unpacking, connecting power, and configuring basic settings like language, contrast, and security.
Explains the main menu structure and how to use buttons to navigate through options.
Details on configuring temperature, programs, system settings, communications, and preparing probes.
Procedures for installing/removing inserts, inserting probes, setting temperatures, and executing calibration programs.
Explains remote operation via RS-232 and USB, and the necessary setup.
Details on configuring baud rate and linefeed for serial and USB communication.
Overview of command syntax, structures, and categorized command lists for controlling the calibrator.
Procedures for calibrating the temperature source, including fundamentals, equipment, and step-by-step instructions.
Procedures for calibrating the input panel, including terminology, equipment, and test processes.
Instructions for cleaning the product, removing moisture, and replacing fuses.
Lists part numbers for user-replaceable components and accessories.
A guide to identifying and resolving common operational problems with the calibrator.
To Next Page
