Fluke 9190A - System Menu (SYSTEM MENU); Display Setup

Operation
Menus and Menu Navigation 2
2-17
System Menu (SYSTEM MENU)
The System menu lets the user set up the display settings, communications protocol,
date/time settings (-P model only), password settings, calibrations settings, and view
system information (see Figure 2-3).
66.03°C
SYSTEM MENU
SYSTEM
SETUP
PASS
WORD CALIB
SYSTEM
INFO
gzs014.eps
Figure 2-3. System Menu
Display Setup
Table 2-15 shows and describes the menu selections on the Display Setup menu.
Table 2-15. Display Setup Menu
66.03°C
DISPLAY SETUP
LANGUAGE: ENGLISH
DECIMAL: PERIOD
KEY AUDIO: ON
DISPLY
SETUP
SYSTEM
MENU
SYSTEM
SETUP
MENU
1
2
3
gzs015.eps
Item Function
 LANGUAGE sets the display language. See “Change Language” on page 2-9.
 DECIMAL set the decimal separator to be a period (.) or a comma (,).

KEY AUDIO turns on (ON) or turns off (OFF) the key-beep sound. See “Toggle Key Beep On or
Off” on page 2-10.
Note
With the Main screen shown in the display, push  and  at the same time to
quickly toggle key beep on or off.