To Next PageTo Next Page
Need help?Do you have a question about the Fluke 9171 and is the answer not in the manual?
General| Stability | ±0.01 °C |
|---|---|
| Stability/year | ±0.05 °C |
| Resolution | 0.01 °C |
| Display Resolution | 0.01 °C |
| Power Supply | 115 V ac (±10 %) 50/60 Hz, 6.0 A or 230 V ac (±10 %) 50/60 Hz, 3.0 A |
| Weight | 6 kg |
| Well Diameter | 25 mm |
| Display | LCD |
Overview of Fluke's Hart Metrology Wells and their purpose.
Lists and explains international electrical symbols used in the manual.
Important safety guidelines, warnings, and cautions for instrument operation.
Information regarding EMC directive, immunity, and emission testing compliance.
Contact information for coordinating service on Fluke products.
Detailed technical specifications for different Metrology Well models.
Recommended operating conditions for the Metrology Well.
Instructions for unpacking and verifying the contents of the Metrology Well package.
Step-by-step guide for initial setup and connection of the Metrology Well.
How to configure basic system parameters like language and decimal format.
Explanation of display settings and features.
Procedures for setting the desired temperature set-point and controlling operation.
Detailed instructions for connecting and configuring a reference probe.
Description of ports and connectors located on the rear of the Metrology Well.
Description of controls, display, and connectors on the front of the Metrology Well.
Details about the LCD display, its sections, and soft key functions.
Explanation of the functions of various front panel buttons.
List of available accessories, including inserts for the Metrology Well.
