Product Overview and Specifications
Product Overview 1
1-3
Product Overview
The Fluke Calibration 9190A Ultra-Cool Drywell (the Product or Calibrator) is a bench-
top temperature calibrator that can calibrate precision temperature instruments from
−95 °C to 140 °C (see Figure 1-1).
The Calibrator has two models: the 9190A and the 9190A-P. The 9190A-P is a “Process”
version of the 9190A that combines the heat source with a built-in thermometer input
panel. The Input Panel includes an input for an external reference/control thermometer
that makes it possible to perform a transmitter loop calibration, comparison calibration, or
a simple check of a temperature sensor. In addition, the Input Panel can read resistance
and current from a probe. For probes that require power to operate, the 4-20 mA input has
a loop-power function that can source up to 24 volts of power.
9190A
-P Option Panel
(Input Panel)
gzs053.eps
Figure 1-1. 9190A Ultra-Cool Drywell (-P Option Shown)
To Next Page
Loading...
