Fluke 9190A - Input Setup Menu (INPUT SETUP); Select Unit Input Menu (-P Only)

Operation
Menus and Menu Navigation 2
2-23
Input Setup Menu (INPUT SETUP)
The Input menu (INPUT MENU) supplies access to the parameters related to the -P
module (process version) or readout function. The parameters found in this menu affect
the performance, accuracy and display type of reference PRTs and UUTs used (see
Figure 2-4). The menus in this section are available on the -P Model only.
66.03°C
INPUT MENU
SELECT
INPUT
SETUP
INPUT
REF
INPUT
gzs026.eps
Figure 2-4. Input Menu
Select Unit Input Menu (-P Only)
Table 2-24 shows and describes the menu selections on the Select Unit Input menu. This
menu is available on the -P Model only.
Table 2-24. Select Unit Input Menu
66.03°C
SELECT UNIT INPUT
SENSOR TYPE: TC
INPUT
SETUP
SELECT
INPUT
MENU
1
gzs025.eps
Item Function

SENSOR TYPE sets the active input for the instrument connected. Selections are: mA, TC, and
RTD.