Product Overview and Specifications
Manual Set 1
1-5
• Do not touch voltages > 30 V ac rms, 42 V ac peak, or
60 V dc.
• Do not apply more than the rated voltage, between the
terminals or between each terminal and earth ground.
• Do not touch the well access surface of the instrument.
• Do not turn off the product at block temperatures higher
than 100 °C. Select a SETPOINT less than 100 °C and let the
instrument to cool before turning it off.
• Use the correct terminals, function, and range for
measurements.
• Do not use test leads if they are damaged. Examine the test
leads for damaged insulation, exposed metal, or if the wear
indicator shows. Check test lead continuity.
• Do not touch the probes to a voltage source when the test
leads are connected to the current terminals.
• Keep fingers behind the finger guards on the probes.
• Do not exceed the Measurement Category (CAT) rating of
the lowest rated individual component of a Product, probe,
or accessory.
Manual Set
The Calibrator includes an Operators Manual and a Getting Started Manual. Both
manuals are online at
www.flukecal.com and on a CD in the Accessory Kit.
This 9190A Operators Manual contains feature information, operation instructions, and
basic user maintenance and troubleshooting information.
The 9190A Getting Started Manual is translated and contains basic information to
quickly set up and use the Calibrator.
The 9190A Product CD contains the Operators Manual, the Getting Started Manual, and
the 9190A Remote Operation interface drivers.
Contact Fluke Calibration
To contact Fluke Calibration, call one of the following telephone numbers:
• Technical Support USA: 1-877-355-3225
• Calibration/Repair USA: 1-877-355-3225
• Canada: 1-800-36-FLUKE (1-800-363-5853)
• Europe: +31-40-2675-200
• Japan: +81-3-6714-3114
• Singapore: +65-6799-5566
• China: +86-400-810-3435
• Brazil: +55-11-3759-7600
• Anywhere in the world: +1-425-446-6110
To see product information and download the latest manual supplements, visit Fluke
Calibration’s website at
www.flukecal.com.
To register your product, visit http://flukecal.com/register-product.
To Next Page
Loading...
