Fluke 9190A - Communications Setup; Date;Time Setup (-P Only)

9190A
Operators Manual
2-18
Communications Setup
Table 2-16 shows and describes the menu selections on the Communication Setup menu.
Table 2-16. Communication Setup Menu
66.03°C
COMMUNICATION SETUP
BAUD RATE: 9600
LINEFEED: ON
COMM
SETUP
SYSTEM
MENU
SYSTEM
SETUP
MENU
1
2
gzs016.eps
tem Function

BAUD RATE is the serial communication transmission rate or baud rate. BAUD can be set to
1200, 2400, 4800, 9600, 19200, or 38400 baud.

LINEFEED turns on or turns off transmission of a line feed character (LF, ASCII 10) after
transmission of a carriage-return.
Date/Time Setup (-P Only)
Table 2-17 shows and describes the menu selections on the Date and Time Setup menu.
Table 2-17. Date and Time Setup Menu
DATE
TIME
66.03°C
DATE/TIME SETUP
TIME: 12:00:00
DATE: 2000-01-01
REPORT DATES: DD/MM/YYYY
SYSTEM
MENU
SYSTEM
SETUP
MENU
1
2
3
gzs017.eps
Item Function
 TIME
[-P Only]
sets the internal time of the instrument. The Product uses a 24-hour clock.
 DATE
[-P Only]
sets the date for the date and time stamp function.
 REPORT DATE
[-P Only]
sets the date format used in the reports.