Fluke 9190A - Cooler Status; Program Menu (PROG MENU)

9190A
Operators Manual
2-14
Cooler Status
Table 2-11 shows and describes the menu selections on the Cooler Status menu.
Note
The information on the Cooler Status menu is not editable. Fluke
Calibration Service Center personnel use this information to help
troubleshoot the system if a malfunction occurs.
Table 2-11. Cooler Status Menu
66.03°C
COOLER STATUS
TEMPERATURE: 27.99 °C
SELF TEST: OK
HEAT BALANCE: 0.000
TEMP
SETUP STATUS
MENU
1
2
3
gzs009.eps
Item Function
 TEMPERATURE shows the temperature of the condenser.
 SELF TEST shows the Stirling Cooler self-test result.

HEAT BALANCE shows the power difference between the top and bottom heaters.
Program Menu (PROG MENU)
The Program menu supplies access to the automated and manual program selections (see
Figure 2-2). A Program is a test that can be configured and run to calibrate an instrument.
66.03°C
PROGRAM MENU
RUN
PROG
RAMP/
SOAK
TEST
RESULT
gzs010.eps
Figure 2-2. Program Menu