Fluke 9172-E-156 - 4 Parts and Controls; 4.1 Back panel

19
Parts and Controls
Back panel
4 PartsandControls
This section describes the exterior features of the Metrology Well.
4.1 Back panel
The following are found on the back of the Metrology Well (see Figure 2 ).
Figure 2 Metrology Well back panel view
Power Cord Plug (1)
The power supply cord attaches to the back panel. Plug the cord into an AC mains sup-
ply appropriate for the voltage range as specied in the specications tables.
Shop for Fluke products online at:
1.888.610.7664
www.MyFlukeStore.com