Fluke 925 - Symbols; Auto Power Off; Error Message Display

5
SYMBOLS
The following symbols are used on the Product and in this manual.
Symbol Description

WARNING.RISK OF DANGER.
»
Consult user documentation.

Battery or battery compartment.
Ã
Conforms to relevant South Korean EMC Standards.
¡
Conforms to relevant Australian Safety and EMC
standards.

Conforms to European Union directives.

This product complies with the WEEE Directive marking
requirements. The afxed label indicates that you must
not discard this electrical/electronic product in domestic
household waste. Product Category: With reference to
the equipment types in the WEEE Directive Annex I, this
product is classed as category 9 “Monitoring and Control
Instrumentation” product. Do not dispose of this product
as unsorted municipal waste.
AUTO POWER OFF
The Fluke-925 Anemometer turns off automatically after 20 minutes to
conserve battery power. Press the  and HOLD buttons to disable the
Auto Power Off feature.
ERROR MESSAGE DISPLAY
If the sensor is not connected to the meter or if the sensor is inoperable,
the meter beeps, the error message “E6” appears on the display, and the
meter shuts down. Connect the sensor or return the meter and sensor for
repair.