Versiv Series Cabling Certification Product Family
Users Manual
112
Micro USB port: This USB port lets you connect the tester to a PC
so you can upload test results to the PC and install software
updates in the tester.
USB type A port: This USB host port lets you connect the Probe to
the tester and save test results on a USB flash drive. On a Versiv
main tester, this port lets you connect a Wi-Fi adapter for access
to Fluke Networks cloud services. (Versiv 2 testers have an
internal Wi-Fi radio.)
Headset jack.
: Starts a test. To start a test, you can also tap TEST on the
display.
Power button. Versiv 2: The LED in the power button shows the
status of the battery charging process. See Table 2 on
page 15.
: Press to go to the home screen.
Connector for the AC adapter. Versiv: The LED is red when the
battery charges, and green when the battery is fully charged.
The LED is yellow if the battery will not charge. See “Charge the
Battery” on page 14.
RJ45 connector: Lets you connect to a network for access to Fluke
Networks cloud services.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
