Need help?Do you have a question about the Fluke 725 and is the answer not in the manual?
General| Pulse duration | 10 ms |
|---|---|
| Auto-step function | Yes |
| Measuring parameters | Current, Frequency, Pressure, RTD, Resistance, Temperature, Thermocouple, Voltage |
| Frequency source accuracy | 0.25 % |
| DC current source accuracy | 0.02 % |
| DC voltage source accuracy | 0.025 % |
| Resistance source accuracy | 1 % |
| Frequency measurement accuracy | 0.05 % |
| Product color | Black, Yellow |
Weight and Dimensions| Depth | 61 mm |
|---|---|
| Width | 130 mm |
| Height | 236 mm |
Precautions against electrical shock, injury, and equipment damage.
Measuring voltage and current using the upper display.
Measuring current with the built-in 24V loop power supply.
Measuring electrical parameters using the lower display.
Steps for measuring temperature using RTD sensors.
Steps for measuring temperature using thermocouple sensors.
Procedure for sourcing a 4-20 mA current output.
Simulating a transmitter's 4-20 mA output in a loop.
Procedures for sourcing voltage, resistance, and frequency.
Simulating temperature signals using thermocouple types.
Simulating temperature signals using RTD types.
Procedure for using a pressure module to source pressure.
To Next Page
