Need help?Do you have a question about the Fluke 725/FPC and is the answer not in the manual?
General| Current | 0 to 24 mA |
|---|---|
| Operating Temperature | -10 °C to 55 °C |
| Display | Dual Display |
| Type | Multi-Function Process Calibrator |
| Loop Power | 24 V |
| Thermocouple Compatibility | J, K, T, E, R, S, B, C |
| RTD Compatibility | Pt100, Pt200, Pt500, Pt1000, Cu10, Cu50, Cu100 |
| Measurement Parameters | Voltage, Current, Resistance, Frequency, Temperature, Pressure |
| Temperature Range | -200 °C to 1372 °C (depending on thermocouple/RTD type) |
| Resistance Range | 0 to 4000 Ω |
| Power Supply | Four AA alkaline batteries |
| Communication Interface | USB |
| Warranty | Three years |
To Next Page
