To Next PageTo Next Page
Need help?Do you have a question about the Fluke 753 and is the answer not in the manual?
General| Type | Documenting Process Calibrator |
|---|---|
| Measurement Functions | Voltage, Current, Resistance, Frequency, Temperature, Pressure |
| Source Functions | Voltage, Current, Resistance, Frequency, Temperature, Pressure |
| Current DC Range | 0 to 24 mA |
| Current DC Resolution | 0.001 mA |
| Current AC Resolution | 0.001 mA |
| Resistance Resolution | 0.1 Ω |
| Frequency Resolution | 0.001 Hz |
| Temperature Thermocouple | J, K, T, E, R, S, B, L, U, N, C |
| HART Communication | Yes |
| Loop Power | 24 V |
| Display | Graphic LCD |
| Interface | RS-232 |
| Power Supply | Rechargeable battery |
| Voltage DC Range | 0 to 30 V |
| Voltage DC Accuracy | ±(0.02% of reading + 2 counts) |
| Voltage AC Range | 0 to 20 V |
| Voltage AC Resolution | 0.01 mV |
| Current DC Accuracy | ±(0.02% of reading + 2 counts) |
| Resistance Range | 0 to 3200 Ω |
| Frequency Accuracy | ±0.01% of reading |
| Temperature RTD | Pt100, Pt200, Pt500, Pt1000 |
| Operating Temperature | -10 °C to 50 °C |
| Storage Temperature | -20 °C to 60 °C |
Contact information and support channels for Fluke Corporation.
Important warnings and cautions to prevent user injury and product damage.
Description of the calibrator's input and output ports and connectors.
Details and functions of the calibrator's front panel buttons.
Explanation of the calibrator's graphical display elements and indicators.
Instructions for attaching the carrying strap and using the stand.
Instructions for charging the calibrator's internal battery.
Methods to check battery status and typical operational times.
Tips and settings to optimize battery usage and longevity.
How to change the language displayed on the calibrator screen.
Adjusting screen brightness and backlight settings.
Steps to set and format the date and time displayed on the unit.
Setting a user-defined identifier for the calibrator.
Understanding and setting automatic and manual measurement ranges.
How to measure electrical parameters like voltage, current, and frequency.
Procedure for performing continuity tests on circuits.
Steps and precautions for measuring pressure using modules.
Instructions for measuring temperature using thermocouples.
Information and procedures for measuring temperature with RTDs.
How to source electrical parameters like voltage, current, and frequency.
Simulating a 4-20 mA transmitter output.
Functionality for supplying loop power to circuits.
How to source pressure using external pumps and modules.
Simulating thermocouple and RTD signals for testing.
Controlling temperature sources using Hart Scientific Drywells.
Applying linear or square-law scaling to source outputs.
Adjusting source output values incrementally or with a ramp function.
Using the ramp feature to sweep output values up or down.
Procedure for recording initial calibration status of a transmitter.
Steps for making calibration adjustments to a transmitter.
Procedure for recording final calibration status of a transmitter.
Specific calibration steps for delta-pressure flow instruments.
Saving, reviewing, and managing stored test results and data.
Setting up and performing data logging of measurements.
Enabling and using the min/max reading capture feature.
Performing calculations using measured and sourced values.
Executing pre-configured calibration tasks.
Erasing stored data like results, min/max, and log sets.
Saving and recalling values using internal registers.
Connecting the calibrator to a PC for data transfer and software use.
Instructions for replacing the internal battery pack.
Guidelines for cleaning the calibrator and its modules.
Information regarding calibration dates and status indicators.
Troubleshooting common issues and when to seek service.
Procedures for calibration, repairs, or servicing by qualified personnel.
List of parts that can be replaced by the user, with part numbers.
List of accessories compatible with the calibrator.
Overall product specifications including size, weight, and power.
Operating and storage conditions for the calibrator.
Compliance with safety standards and agency certifications.
Specific accuracy and performance details for electrical measurements.
Specific accuracy and performance details for temperature measurements.
