To Next PageTo Next Page
Need help?Do you have a question about the Fluke 729 and is the answer not in the manual?
General| Type | Automatic Pressure Calibrator |
|---|---|
| mA Measure | 0 to 24 mA |
| Loop Power | 24 V DC |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Ingress Protection | IP54 |
| Pressure Accuracy | 0.02% of full scale |
| Pressure Media | Non-corrosive, clean, dry gases |
| Pressure Units | psi, inH2O, inHg, bar, mbar, kPa, cmH2O |
| Display | Color graphical display |
| Communication | USB |
| Power | Rechargeable Li-ion battery |
| Battery Life | 8 hours |
| Safety | CSA, CE |
| Humidity | 0 to 90% RH non-condensing |
Identifies dangerous conditions for users and potential damage to the product or equipment.
Guides through calibrating the pressure components of the Product.
Guides through calibrating the electrical components of the Product.
Add or delete Product user names from the menu.
Add or delete Product user names from the menu.
Calibrate a P/I transmitter with current measurement.
Feature to calibrate a pressure switch.
Calibrate a current to pressure (I/P) converter.
Feature to test a pressure device for leaks.
Calibrate a pressure to voltage transmitter with voltage measurement.
Calibrate a pressure-to-pressure transmitter.
Perform HART calibration without a downloaded task.
Perform HART calibration using a downloaded task.
Calibrate a connected HART device without a downloaded task.
Sets the digital pressure value of the Product to zero.
Details pressure measurement accuracy and compensation.
Details electrical measurement ranges, resolution, and accuracy.
