Automatic Pressure Calibrator
The Display
17
Triple-Function Display
When the third function (RTD, External Pressure Module,
HART Transmitter, or FC secondary device) is connected,
the Product changes to triple-function display automatically.
In the subsequent triple-function display, the original bottom
half of the display is divided into two parts:
• The left display continues to show the electrical
measurement display.
• The right display shows the model name, reading, and
units from the selected third function. See Figure 5. The
figure shows a transmitter device (3051C).
When more than one third function is available, use the
arrow keys to highlight the device (in yellow) in the right
display. Then use the softkeys to select the device to show.
idj022.bmp
Figure 5. Triple-Function Display
To Next Page
Loading...
