Fluke 729 - Introduction

1
Introduction
The Fluke 729 and 729 FC Automatic Pressure
Calibrators (the Product)
are portable field pressure
calibration tools for lab or field use. This battery-operated
product performs automatic pressure calibration of
transmitters, pressure switches, and gauges. The
automatic functions are done by the Product or by
downloaded tasks from calibration-management software
(CMS). The Product also supplies basic HART

communicator functions when used with HART-capable
transmitters. “FC” designates Fluke Connect

throughout
this manual.
Product key features and benefits include:
• Automatic pressure calibration of transmitters,
pressure switches and pressure gauges.
• Source and measure pressure to test and calibrate
pressure sensors, transmitters, and other pressure
instruments.
• Source and simulate milliamp signals while
measuring pressure for testing current to pressure
converters (I/P).
• HART (Highway Addressable Remote Transducer)
communication to configure and perform trim on
HART smart-pressure transmitters.
• Provides Loop Power and simultaneously measures
mA output from a connected device.
• Measures pressure with any of 50 Fluke-750P Series
pressure modules.