To Next PageTo Next Page
Need help?Do you have a question about the Fluke 754 and is the answer not in the manual?
General| Type | Documenting Process Calibrator |
|---|---|
| Current Measurement Range | 0 to 24 mA |
| RTD Measurement | Yes |
| Thermocouple Measurement | Yes |
| HART Communication | Yes |
| Operating Temperature | -10 °C to 55 °C |
| Measurement Functions | Voltage, Current, Frequency, Pressure |
| Source Functions | Voltage, Current, Frequency, Temperature |
| Pressure Measurement | With optional pressure modules |
| Loop Power | 24 V DC |
| Display | Backlit LCD |
| Communication Interface | USB |
| Current Measurement Accuracy | 0.01% + 0.005% of full scale |
Provides telephone numbers and website for contacting Fluke for support.
Lists warnings and cautions for safe operation and to prevent hazards to the user.
Details safety advice regarding test leads, connections, and product integrity.
Lists all items included with the product for basic operation.
Summarizes the key measurement, sourcing, and calibration capabilities of the device.
Guides users through initial product setup, battery charging, and basic connections.
Explains the purpose and use of each input and output connector on the device.
Details the function and operation of all physical buttons and softkeys on the device.
Provides instructions on how to attach the carrying strap and use the device's stand.
Covers changing display languages, intensity, and setting date/time.
Explains backlight control and setting a personalized product ID.
Covers measure mode, ranges, and electrical parameter measurements.
Details continuity, pressure, and temperature (TC/RTD) measurements.
Explains scaling for linear/square-root response and using custom units.
Covers damping, electrical parameters, and transmitter simulation for sourcing.
Details using loop power and sourcing pressure with external modules.
Lists compatible measure/source combinations with and without loop power.
Guides on calibrating instruments, including generating 'As Found' data and switch calibration.
Covers reviewing, logging, and recording min/max measurements.
Explains running tasks, clearing memory, and using the built-in calculator.
Covers PC connectivity, battery replacement, cleaning, and calibration data.
Provides general, environmental, and standards specifications for the device.
Lists detailed accuracy specs for various DC/AC voltage, current, resistance, frequency, and temperature functions.
