Fluke 754 - Buttons

753/754
Users Manual
16
Table 4. Buttons
Item Button Description
 o Turns the Product on and off.
 
Selects mA (current) measure or source function. For loop power on/off, go to the Setup
mode.
  Selects the dc voltage function in MEASURE mode, or selects dc voltage in SOURCE mode.
 t
Selects TC (thermocouple) or RTD (resistance temperature detector) measurement or
sourcing functions.
 p Selects the pressure measurement or source function.

W
X
Y
Z
Softkeys. Does the function specified by the label above each softkey on the display.
  Adjusts the backlight intensity (three levels).
 s Enters and exits Setup mode to change operating parameters.

r (754)
 (753)
(754) Toggles between HART communication mode and analog operation. In calculator
mode, this key supplies the square root function.
(753) Adjusts the Range of the Product.
1.800.868.7495info@Fluke-Direct.ca
Fluke-Direct.ca