Fluke VisiFault User Manual

VisiFault Instruction Sheet 8/16/2004
English Page
1 of 6
Panel Size: 4-1/8" x 7"
PN 2157599 May 2004 Rev. 1 8/04
 2004 Fluke Networks. All rights reserved. Printed in USA.
All product names are trademarks of their respective companies.
VisiFault

Visual Fault Locator
Instruction Sheet
The VisiFault Visual Fault Locator (VFL) is a visible light source
that helps you trace optical fibers, check fiber continuity, and
find faults such as breaks, bad splices, and tight bends in fiber
optic cable.
Safety Information
W
*
Warning: Class 2 Laser
To avoid possible eye damage caused by hazardous
radiation
• Never look directly into the VFL’s output (item
A in
Figure 1). Momentary exposure to the VFL’s output will
not damage your eyes; however, direct, long-term
exposure is potentially hazardous.
• Cover the VFL’s output with the dust cap when the VFL
is not in use.
• Do not open the case (except to open the battery cover
to change the batteries); no user-serviceable parts are
inside.
• Do not modify the VFL.
• Do not magnify or otherwise modify the laser output.
Use only approved connectors and adapters.
• Do not use controls, adjustments, or procedures not
documented or approved by Fluke Networks.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

Fluke VisiFault Specifications

General

Wavelength	650 nm
Laser Safety	Class II laser product
Type	Visual Fault Locator
Fiber Compatibility	Single-mode and multimode
Connector	2.5 mm universal
Storage Temperature	-20 °C to +70 °C

Summary

VisiFault Visual Fault Locator

Product Overview

The VisiFault Visual Fault Locator (VFL) is a visible light source for tracing optical fibers and finding faults.

Laser Safety Warnings

Critical safety precautions to avoid eye damage from the Class 2 laser output.

Operating the VisiFault

Step-by-step guide on how to connect, power on, and use the VisiFault's different modes.

Maintenance and Accessories

Information on cleaning the device, replacing batteries, and available accessories like the universal adapter.

Product Specifications

Safety Compliance and Warranty

Safety Compliance Standards

Details on safety certifications and compliance with laser safety regulations.

Limited Warranty Information

Explains the warranty period for products, accessories, and limitations of liability.