To Next PageTo Next Page
Need help?Do you have a question about the Fluke 820-2 and is the answer not in the manual?
General| Accuracy | 0.2 % |
|---|---|
| Control type | Button |
| Display type | LED |
| Product type | LED Stroboscope |
| Certification | CE |
| Housing color | Black, Yellow |
| Light intensity | 4800 lx |
| Drop proof up to | 1 m |
| Impact-resistant | Yes |
| Color temperature | 6500 K |
| Operating altitude | 0 - 2000 m |
| Minimum pulse width | 50 µm |
| Flash frequency range | 0.5 - 5000 Hz |
| Supported resolutions | 30 to 999 FPM = 0.1 1000 to 300000 = 1 0.5 Hz to 999 Hz = 0.1 1000 Hz to 5000 Hz = 1 |
| Non-operating altitude | 0 - 12000 m |
| Flash frequency setting | FPM, Hz |
| Storage temperature (T-T) | -10 - 50 °C |
| Operating temperature (T-T) | 0 - 45 °C |
| Trigger voltage (High level) | 3 - 32 V |
| Operating relative humidity (H-H) | 0 - 90 % |
Weight and Dimensions| Depth | 57.1 mm |
|---|---|
| Width | 60.9 mm |
| Height | 190.5 mm |
| Weight | 240 g |
Indicates when the battery is low and requires replacement.
Details the product's factory default operational parameters.
Explains display indicators for external trigger frequency limits.
Provides essential cautions and guidance for product upkeep and service.
Step-by-step instructions for replacing the product's batteries.
Lists the physical dimensions and weight of the product.
Details operating and storage conditions like temperature and humidity.
Specifies standards for the product's operational electromagnetic environment.
Outlines EMC requirements and intended use for Class A equipment.
