Fluke 820-2 - Product Use; Default Settings

Stroboscope
Product Use
9
Product Use
The subsequent sections tell you how to use the Product.
Push to turn on the Product. Push and hold for 2
seconds to turn off the Product.
Default Settings
To set the Product to the default settings, push and hold  and
.
The default settings are:
• 1000 FPM
• 16.7 Hz
• 333 Pulse μs
• 2.0 Pulse deg
• 0 Delay ms
• 0 Phase deg
• External pulse divider = 1
• External trigger edge = 0 (positive)