Stroboscope
Maintenance
11
External Trigger
Use the External Trigger Input Connector for outside trigger
sources. When the Connector is plugged into the Product (see
Figure 1, item ) the Product displays . Table 3
shows what options are available when an external trigger is
used. For Connector polarity information, see Figure 2.
+
-
gsh04.eps
Figure 2. External Trigger Connector Polarity
Maintenance
Caution
The Product contains no user-serviceable parts. To
prevent damage to the Product, do not open the
case. For service, see “How to Contact Fluke”.
To Next Page
Loading...
