Fluval C Power Filter User Manual

1
PACKING LIST
C Power Filter
Instruction Manual
Quick Start Guide
Congratulations on the purchase of your new Fluval C Power Filter. Please allow
approximately 15-20 minutes for the complete installation of filter parts and
inserts. Inspect the filter for any visible signs of shipping damage, and verify
that the motor is securely fastened to the filter case. The following parts should
be included in your package.
Biological Trickle chamber
with cover
Filter Cover
Mechanical Frame
“U” Tube Telescopic Intake Tube
C-Nodes
Activated Carbon
Impeller Cover Assembly
Chemical Basket
Motor Unit with Seal RingImpeller
Bio-Screen
Poly/Foam Pad
Filter Case
Leveling
Device
09601000 11B10

Fluval C Power Filter Specifications

General

Type	Power Filter
Category	Water Filtration Systems
Filtration Stages	5
Filtration Type	Mechanical, Chemical, Biological
Weight	Varies by model
Flow Rate	264 GPH
Aquarium Size	Up to 70 gallons
Media Included	Foam, Activated Carbon, BioMax
Power Consumption	Varies by model
Voltage	120V

Summary

Packing List

Preparing Filter Inserts

Attaching "U" Tube

Installing Filter Inserts

Attaching Leveling Device

Power Filter Start-Up

Important Safety Instructions

How it Works

New 5 Stage Filtration System

Explains the 5 stages of filtration: Mechanical, Chemical, and Biological stages.

Power Filter Maintenance

Poly/Foam Pad Maintenance

Instructions for rinsing and replacing the Poly/Foam Pad using aquarium water.

Activated Carbon Insert Maintenance

How to remove and replace the Activated Carbon insert from the chemical basket.

Bio-Screen Maintenance

Steps for rinsing and replacing the Bio-Screen using aquarium water.

Biological C-Nodes Maintenance

Impeller and Motor Maintenance

Instructions for removing, cleaning, and reassembling the impeller and motor unit.

Trouble-Shooting & FAQs