Need help?Do you have a question about the Fly Sky FS-G7P and is the answer not in the manual?
General| Channels | 7 |
|---|---|
| Online Update | Yes |
| Model Memory | 20 |
| RF Power | <20dBm |
| Data Output | PPM, SBUS |
| Temperature Range | -10℃—+60℃ |
| Certification | CE, FCC |
Essential safety guidelines for product operation and handling.
Instructions for installing batteries in the transmitter, including safety precautions.
Guidance on how to connect the receiver and servos to the model.
Procedure for binding the transmitter and receiver for initial use or replacement.
Performs reverse processing of output data for one or more channels.
Adjusts the travel amount of servo output for left/right and up/down.
Sets and adjusts the neutral data for each channel.
Quickly adjusts output value of channels for better manipulation effect.
Sets the output data curve adjustment for direction and throttle channels.
Limits channel output to 50% for new users.
Settings for channels CH3 to CH7 for advanced control.
Enables two channels to act in conjunction with each other.
Safety feature to protect model from loss of control.
Configures RF type, receiving type, output mode, and servo frequency.
Restores neutral position and endpoints of transmitter controls.
Resets the entire transmitter system to factory default settings.
Steps for re-binding the receiver to the transmitter.
Sets out-of-control protection values for receiver channels.
To Next Page
