Need help?Do you have a question about the Fly Sky FS-iA6B and is the answer not in the manual?
General| Brand | Fly Sky |
|---|---|
| Model | FS-iA6B |
| Category | Control Systems |
| Language | English |
Steps for binding the transmitter and receiver, including setup and process.
Important considerations to ensure successful transmitter-receiver binding.
Details compatible aircraft types: fixed-wing, glider, helicopter.
Specifies receiver sensitivity (-105dBm) and modulation type (GFSK).
Information on system type (AFHDS2A) and channel quantity (1024 steps).
Details about the bind port, power port, and power requirements.
Includes weight, antenna length, dimensions, and color.
Lists product certifications like CE and FCC.
Optimal placement of dual antennas at 90 degrees for maximum range and signal integrity.
Ensuring antennas are kept away from conductive materials and noise sources.
Example wiring for a receiver with ailerons, elevator, and landing gear.
Example wiring for a receiver with variable pitch, governor, and gyroscope.
Explanation of the receiver's ports: CH1-CH6, Bind/VCC, OUT, IN, CH1/PPM.
Step-by-step guide for binding the receiver to a transmitter, including LED indicators.
Notice regarding potential loss of control if binding state is entered by mistake.
Instructions for connecting FS-CEV04 to receiver for i-BUS and PPM output.
Guide for connecting various sensor modules to the receiver's input ports.
Procedure for setting up the speed sensor, including RPM data.
Statement on testing and compliance with FCC Part 15 limits for digital devices.
Measures to correct harmful interference to radio or television reception.
Conditions for compliance: no harmful interference and acceptance of received interference.
Mandatory separation distance for antennas to ensure compliance with regulations.
To Next Page
