Need help?Do you have a question about the Fly Sky FS-IT4S and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Modulation | GFSK |
| Display | LCD |
| Bandwidth | 500kHz |
| 2.4G System | AFHDS 2A |
| DSC Port | Yes |
| Operating Voltage | 3.7V |
| Online Update | Yes |
| Type | Transmitter |
| RF Range | 2.4GHz |
| RF Power | 20dBm |
| Antenna Length | 26mm |
Instructions for connecting the transmitter to the charger for battery charging.
Specifications for the magnetic RPM telemetry sensor.
Specifications for the optical RPM telemetry sensor.
Specifications for the temperature telemetry sensor.
Specifications for the voltage telemetry sensor.
Specifications for the i-BUS serial bus receiver.
Diagram and steps for connecting receiver and servos with a motor controller.
Diagram and steps for connecting receiver and servos for gas models.
Step-by-step guide on how to bind the receiver to the transmitter.
Explanation of the different ports and their functions on the receiver.
Adjusts servo direction individually for each of the 4 channels.
Modifies the transfer curve between steering wheel and channel 1.
Defines throttle behavior near its neutral position (dead zone, forward, backward).
Automatic brake system function to avoid wheel blocking and loss of control.
Applies independent mixes between master and slave channels.
Allows saving and switching between 20 different vehicle configurations.
Configures system-wide parameters like language, backlight, and sound.
Explains how to control vehicle direction using the steering wheel.
Explains how to control vehicle speed using the throttle trigger.
Procedure to configure failsafe behavior for receiver channels.
To Next Page
