Need help?Do you have a question about the Fly Sky FS-I4 and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Bandwidth | 500kHz |
| 2.4G System | AFHDS |
| Code Type | GFSK |
| Sensitivity | 1024 |
| Low Voltage Warning | Yes |
| DSC Port | Yes |
| Antenna Length | 26mm |
| RF Power | 20dBm |
| Power Input | 6V |
Welcome and overview of the Fly Sky FS-i4 system.
Contact local dealer or website for support issues.
Explains danger, warning, and attention symbols.
Guidelines on flying conditions, control direction, and shutdown.
Avoid adverse weather, locations, and operating under influence.
Pre-operation checks, hot parts, and throttle position.
Explanation of the AFHDS2A digital radio system.
Technical data for RF range, bandwidth, and power.
Essential steps for turning the system on and off safely.
Describes system features like antenna, ID binding, and power efficiency.
Guide on how to switch between AFHDS and AFHDS2A system modes.
Specifications for channels, RF, power, size, and certification.
Specifications for channels, sensitivity, power, size, and certification.
Instructions for physically connecting servos to the receiver.
Explains the purpose of each connector on the receiver.
Detailed instructions for binding the transmitter and receiver.
Advice on what to do if binding fails or causes loss of control.
Diagram identifying all controls on the transmitter.
Detailed explanation of transmitter controls and ports.
Step-by-step guide to reconfigure stick modes for user preference.
Steps for correctly powering up the transmitter and receiver.
Steps for correctly powering down the transmitter and receiver.
How channel 1 controls the aircraft's lateral movement.
How channel 2 controls the aircraft's longitudinal movement.
How channel 3 controls the aircraft's ascent and descent.
How channel 4 controls the aircraft's turning direction.
Lists all items included in the product packaging.
Details FCC compliance, rules, and user responsibilities.
To Next Page
