EasyManua.ls Logo

Fly Sky FS-TH9X User Manual

Fly Sky FS-TH9X
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTRUCTION MANUAL
FS-TH9X
Technical updates available at:
Http://www.flyskychina.com
Entire Contents c Copyright 2007
Question and Answer IconNeed help?

Do you have a question about the Fly Sky FS-TH9X and is the answer not in the manual?

Fly Sky FS-TH9X Specifications

General IconGeneral
BrandFly Sky
ModelFS-TH9X
CategoryRemote Control
LanguageEnglish

Summary

FS-TH9X Flying Safety Precautions

FS-TH9X Radio Installation Guide

Receiver and Servo Connections

Connect receiver and servos, orienting connectors correctly and avoiding wire strain.

FS-TH9X Battery Charging and Range Testing

Charging the Ni-Cd Batteries

Details on charging transmitter and receiver Ni-Cd batteries for optimal performance and longevity.

Range Testing Your R/C System

Procedure for testing the transmitter's range to ensure safe flight operations.

FS-TH9X LCD and Programming Controls

FS-TH9X System Setting Configuration

Model Selection (MODEL SELE)

Selects which of the 8 model memories to set up or fly.

Model Name Editing (NAME EDIT)

Input and assign a model name to a specific memory for easy identification.

Model Type Selection (TYPE SELE)

Sets the type of programming used for this model (Heli, Acro, Glid).

Helicopter Type Selection

Supports 5 basic swashplate setups, including single servo and CCPM mixing.

FS-TH9X Helicopter Function Settings

Throttle Curve Adjustment

Offers three separate throttle curves with five adjustable points per curve.

Pitch Curve Adjustment

Features four independent pitch curves with up to five adjustable points.

Swashplate Mixing Setup

Adjusts rates for aileron, elevator, and collective pitch functions.

FS-TH9X Airplane Function Settings

Throttle Hold Function

Safety switch, holds throttle servo in off position during autorotation.

FS-TH9X Glider Function Settings

Servo Reverse Function

Electronically reverses servo throw for all 9 channels.

Sub-Trim Servo Centering

Electronically adjusts servo centering, individually adjustable for all 8 channels.

End Point Travel Adjustment

Independently adjusts each end of a servo's travel, ranges from 0% to 120%.

Dual Rate and Exponential (D/R & EXP)

Allows programming two control rates selected with a switch for aileron, elevator, rudder.

Fail Safe Configuration (FAIL SAF)

Sets responses in case of signal loss or low receiver battery (PCM mode only).

Related product manuals