2
Head Plate
Boom Plate
Mid Plate
Head Assembly (These three individual pieces are shipped as one assembled unit)
Quick release
plate
Quick release
adapter
Lever to remove /
aach the quick release
Unico Quick Release Adapter
1X 19mm Adapter
1X 22mm Adapter
NOTE: A locking pin located at the front prevents camera rotaon.
Table Clamp
Storage Bag
Safety Hints
ATTENTION: PLEASE READ THIS BEFORE USING TO PREVENT SERIOUS DAMAGE TO THE GEAR!
BE HIGHLY VIGILANT OF SURROUNDINGS
Check the area you will be shoong in, before hand. Make sure your path is clear. Look for obstacles and
note anything you might run into or trip over. Extra care is also necessary when tackling stairs and other
kinds of uneven ground.
ALWAYS WEAR PROTECTIVE GEAR
If you intend to shoot while moving fast or while traversing uneven terrain, do not hesitate to wear
protecve gear as knee or elbow pads, or a helmet.
DO NOT SHOOT IN UNSAFE CONDITIONS
Avoid situaons where one commonly falls like skis, skates or running in muddy elds.
To Next Page
Loading...
Need help?
General
