Flycam Flowline - Flowline Vest Setup; Connecting Support Bar and Wearing Vest; Adjusting Support Bar Height; Rope Tension and Camera Attachment

2
 Join support bar with secon of support
jacket by push-t technique. Similarly, join
front secon with support bar as shown.
 Wear support jacket and ghten the buckles
provided at waist and chest and adjust as per
your convenience.
NOTE: The four knobs provided on back of
support jacket allows height adjustment of
support bar.
Flowline Vest Setup
 Aach camera to hook and ghten with
provided knob to ensure slip-free connecon.
 Use spring at back of support jacket to adjust
tension of rope as required.
 Loosen knob at support bar to adjust posion
of camera according to eye-level, if required.