15
Step 8: Install headlight
A. Using the provided 4mm allen wrench, remove the screw and washers from the
front of the fork. Set aside.
B. Align the headlight bracket with the fork and reinstall the screw with washers
using the 4mm allen wrench.
C. Fully install the connector to the rear of the headlight housing.
D. Adjust the angle of the headlight beam to illuminate the road ahead, while ensuring the
light will not blind or obscure the vision of oncoming trac or pedestrians.
Note: It is not recommended to ride at night. If riding at night cannot be avoided, ensure the
headlight is always on and functioning correctly while you are riding.
A
C
B
D
To Next Page
Loading...
