19
Step 10: Check fastener torque values
Area of Bike Hardware Torque (Nm)
Handlebar
Stem Clamp Bolts 6
Brake Lever Clamp Bolts 6
Stem Faceplate Bolts 6 to 8
Stem Cover Bolt 6 to 8
Seat Post Seat Mounting Bolts 10
Kickstand Kickstand Bolt 30
Front/Rear
Brakes
Disc Brake Rotor to Hub 8
Caliper Adapter to Frame 6 to 8
Caliper to Adapter 6 to 8
Rear
Dropout
Rear Axle Nuts 50
Chain Tensioner Mounting Bolt 6
Bottom
Bracket
Crank Arm Bolt 40
Pedal into Crank Arm 35
Chain Ring Bolts 8
Step 11: Inflate tires to 30 psi
WARNING! It is important to maintain proper air pressure in
the tires while riding. Do not overinflate or underinflate the tires.
Overinflated tires may burst. Inflate your tires using an air source
with a pressure gauge to avoid overinflation. Underinflated tires
may impair the control of the eBike and cause a safety hazard.
To Next Page
Loading...
