Flying Voice FIP16 - Voip Qos

Web Configuration FIP16 User Manual
NAT Traversal
!
VoIP QoS
!
Configuration can be based on the scene environment to modify the parameters
Mark All AVT Packets
The default enable is on
RFC 2543 Call Hold
The default enable is on
SRTP
The default is disabled
SRTP Prefer Encryption
Support for AES_CM and ARIA_CM
Service Type
Default general
DNS Refresh Timer
Modify the DNS refresh time, the default value of 0
Transp o rt
The transmission type defaults to UDP
Parameters name
Description
NAT Traversal
Whether to enable NAT mode, or select STUN to penetrate
STUN Server Address
STUN server IP address
NAT Refresh Interval(sec)
Refresh interval
STUN Server Port
STUN port, the default is 3478
Parameters name
Description
SIP QoS(0-63)
Defaults to 46
RTP QoS(0-63)
Defaults to 46