4. Flight Model Options
The FlyInside Bell 47G supports multiple realism levels and options to
suit your control setup and skill level. To configure these, run FlyInside
Heli Manager, and go to the Flight Model tab.
“Enable Engine Governor” allows you to switch the included engine
governor on and off. When on, the helicopter automatically maintains
100% rotor RPM if able. If turned off, you’ll need to manually control the
RPM via throttle, as described at the end of Chapter 3.
Easy, Medium, and Realistic allow you to change the flight difficulty.
Realistic flies just like the real thing, requiring minute control inputs and
a gentle touch. Easy is self-stabilizing, has little torque effect, and offers
a gentle introduction to helicopter flight. Medium of course falls in-
between.
To Next Page
Loading...